When you need to power 480V forestry equipment or large structural welders, you are usually stuck dragging a massive diesel tow-behind generator into the woods. The Makinex 32kW 480V Generator eliminates that liability entirely by delivering the same heavy industrial output as a trailer-mounted unit but packs it into a compact frame that fits securely in your service truck bed, allowing you to reach remote landings that would bog down a tow-behind.
This machine is a true workstation for the heavy equipment technician. While most portable units stop at 240V, this generator delivers 480V three-phase power alongside standard 120V outlets. You can run high-voltage hydraulic power packs, slashers, and industrial conveyors while simultaneously powering your grinders and lights. It completely removes the need to haul multiple generators or run voltage-dropping extension cords across the site.
Reliability in the backcountry is doubled thanks to its unique dual Honda GX690 engine configuration. By running two engines in parallel, you get the massive torque needed to start heavy electric motors without stalling. This setup also offers critical redundancy; if one engine requires maintenance, you aren't left completely stranded without power, a level of security that single-engine diesel units cannot match.
Efficiency is built into the core of this machine. It uses advanced permanent magnet radial flux alternator technology, which draws 15% more power from the engines than standard copper-wound alternators. This design eliminates the voltage regulator—a common failure point—and delivers clean, consistent sine-wave power that is safe for the sensitive PLCs and computer controls on modern forestry heads.
Field conditions are brutal, so the Makinex 32kW 480V Generator is constructed with a heavy-duty galvanized frame and a central lifting eye. It is designed to be easily moved by a log loader or crane and features industrial-grade RCD and RCBO protection. This ensures your crew stays safe from ground faults and electrical hazards, even when working in the damp, muddy conditions typical of a harvest site.
Don't let logistics limit your repair capabilities. Whether you are running a remote debarker or welding heavy structural steel, this unit gives you grid-quality power anywhere your truck can go. Equip your operation with the Makinex 32kW 480V Generator and leave the clumsy tow-behind trailer at the shop.
High-Voltage Mobility
The only portable generator on the market that delivers 480V three-phase power in a package small enough to fit in a standard pickup bed, giving you industrial capability without a trailer.
Dual Engine Reliability
Powered by two Honda GX690 V-Twin engines running in parallel, providing the massive torque needed to start heavy electric motors and offering redundancy if one engine needs service.
Mixed Voltage Output
Features specific outlets for 480V, 208V, and 120V, allowing you to run heavy three-phase machinery and standard hand tools simultaneously from a single unit.
Radial Flux Efficiency
Utilizes advanced permanent magnet alternator technology that draws 15% more power from the engines than standard copper-wound designs, eliminating the need for a fragile voltage regulator (AVR).
Safe for Electronics
Generates clean, low-harmonic distortion power that is safe for the sensitive PLCs and computer control systems found on modern forestry processing heads and debarkers.
Operator Safety
Built with industrial-grade RCD and RCBO protection at the panel to prevent electrical shock, ensuring crew safety even in damp or muddy logging environments.
Jobsite Tough
Constructed with a heavy-duty galvanized steel frame and a central lifting eye, designed to be easily moved by a log loader or crane without structural damage.
Additional Options: Check out other Generators or other Makinex products
Need expert advice? Call the experts who actually use the tools—Give us a call! (844)-498-2313
Unlock Exclusive Benefits Today:
When you need to power 480V forestry equipment or large structural welders, you are usually stuck dragging a massive diesel tow-behind generator into the woods. The Makinex 32kW 480V Generator eliminates that liability entirely by delivering the same heavy industrial output as a trailer-mounted unit but packs it into a compact frame that fits securely in your service truck bed, allowing you to reach remote landings that would bog down a tow-behind.
This machine is a true workstation for the heavy equipment technician. While most portable units stop at 240V, this generator delivers 480V three-phase power alongside standard 120V outlets. You can run high-voltage hydraulic power packs, slashers, and industrial conveyors while simultaneously powering your grinders and lights. It completely removes the need to haul multiple generators or run voltage-dropping extension cords across the site.
Reliability in the backcountry is doubled thanks to its unique dual Honda GX690 engine configuration. By running two engines in parallel, you get the massive torque needed to start heavy electric motors without stalling. This setup also offers critical redundancy; if one engine requires maintenance, you aren't left completely stranded without power, a level of security that single-engine diesel units cannot match.
Efficiency is built into the core of this machine. It uses advanced permanent magnet radial flux alternator technology, which draws 15% more power from the engines than standard copper-wound alternators. This design eliminates the voltage regulator—a common failure point—and delivers clean, consistent sine-wave power that is safe for the sensitive PLCs and computer controls on modern forestry heads.
Field conditions are brutal, so the Makinex 32kW 480V Generator is constructed with a heavy-duty galvanized frame and a central lifting eye. It is designed to be easily moved by a log loader or crane and features industrial-grade RCD and RCBO protection. This ensures your crew stays safe from ground faults and electrical hazards, even when working in the damp, muddy conditions typical of a harvest site.
Don't let logistics limit your repair capabilities. Whether you are running a remote debarker or welding heavy structural steel, this unit gives you grid-quality power anywhere your truck can go. Equip your operation with the Makinex 32kW 480V Generator and leave the clumsy tow-behind trailer at the shop.
High-Voltage Mobility
The only portable generator on the market that delivers 480V three-phase power in a package small enough to fit in a standard pickup bed, giving you industrial capability without a trailer.
Dual Engine Reliability
Powered by two Honda GX690 V-Twin engines running in parallel, providing the massive torque needed to start heavy electric motors and offering redundancy if one engine needs service.
Mixed Voltage Output
Features specific outlets for 480V, 208V, and 120V, allowing you to run heavy three-phase machinery and standard hand tools simultaneously from a single unit.
Radial Flux Efficiency
Utilizes advanced permanent magnet alternator technology that draws 15% more power from the engines than standard copper-wound designs, eliminating the need for a fragile voltage regulator (AVR).
Safe for Electronics
Generates clean, low-harmonic distortion power that is safe for the sensitive PLCs and computer control systems found on modern forestry processing heads and debarkers.
Operator Safety
Built with industrial-grade RCD and RCBO protection at the panel to prevent electrical shock, ensuring crew safety even in damp or muddy logging environments.
Jobsite Tough
Constructed with a heavy-duty galvanized steel frame and a central lifting eye, designed to be easily moved by a log loader or crane without structural damage.
Additional Options: Check out other Generators or other Makinex products
Need expert advice? Call the experts who actually use the tools—Give us a call! (844)-498-2313
