Are you tired of staring down a massive, deep-rooted stump knowing your standard dirt bucket is just going to bounce off the surface? Most operators reach a point of total frustration when they realize that a 72-inch bucket is essentially a sail in the wind when it comes to digging; it spreads your machine’s power so thin that you can't even penetrate the hardpan, let alone snap a taproot. When you’re fighting the earth with the wrong geometry, you aren't just wasting fuel—you're putting thousands of dollars of stress on your cylinders and pins while the stump stays exactly where it started.
The Loflin Fabrication stump bucket is engineered to turn that wasted energy into raw, ground-breaking leverage by funneling your loader's entire breakout force into a narrow, reinforced prying edge. This isn't a scaled-up toy; it is a specialized industrial tool designed for the high-flow, high-torque environment of a modern skid steer. By focusing the pressure, you can slice through the earth like a hot knife through butter, reaching deep under the root ball to provide the mechanical advantage necessary to pop obstacles that would stall any other attachment in your fleet.
When you’re operating a 75+ HP track loader or a heavy-frame skid steer, you need steel that can actually handle the "grunt" of your machine. While economy buckets use thin, mild steel that "smiles" or twists the moment you apply lateral pressure, the Loflin Fabrication stump bucket is a 425-lb powerhouse built with a 1/2" thick front cutting edge and 3/8" reinforced side plates. This is American-made high-carbon steel designed to stay true through years of heavy prying, demolition, and rock removal, ensuring your investment doesn't end up as a piece of scrap metal after one tough job.
One of the biggest bottlenecks in land clearing is the constant "stop-and-start" of jumping out of the cab to hack away at lateral roots with a chainsaw. This bucket eliminates that downtime with aggressive, deep-serrated side teeth that act as an integrated root saw. As you dig and tilt, these teeth saw through the underground anchors of the stump, allowing you to stay in the climate-controlled comfort of your cab while the bucket does the work of three men. Combined with the three replaceable series-23 cast-iron teeth, you have an attachment that bites into the ground and refuses to let go.
The utility of this bucket extends far beyond just stump removal; it is the ultimate "problem solver" for site preparation and demolition contractors. The elongated floor and narrow profile make it the ideal choice for digging deep footings, trenching for heavy utility lines, or prying up old asphalt and concrete slabs with minimal surface disturbance. It allows you to be incredibly precise, removing a single buried boulder or post without destroying the surrounding grade, saving you hours of remedial dirt work at the end of the day.
At the end of the shift, your productivity depends on gear that doesn't need to be babied, and the Loflin Fabrication stump bucket is built for as many hours as you can handle. Every seam is expertly welded and finished with an industrial powder coat right here in the USA to ensure it stands up to the elements and the abuse of the job site. When you click this into your universal quick-attach plate, you’re equipping your machine with a professional-grade extraction tool that is purpose-built to reclaim the land and outlast the competition.
Massive Breakout Leverage
The elongated, narrow floor acts as a powerful lever, concentrating your loader's hydraulic force to pop deep-seated stumps that standard buckets can't budge.
Industrial-Strength Steel
Built with a 1/2" thick front cutting edge and 3/8" side walls, this 425-lb beast is designed to handle the high-torque prying of 75+ HP machines without warping.
Integrated Root Saws
Aggressive serrated teeth on the side plates saw through lateral roots while you dig, keeping you in the cab instead of reaching for a chainsaw.
Replaceable Backhoe Teeth
Equipped with three Series-23 cast-iron teeth that provide surgical ground penetration and can be easily swapped out after years of heavy use.
Deep-Reach Geometry
The extended bucket depth allows you to get further under the root ball, providing the superior mechanical advantage needed for large-diameter extractions.
Surgical Precision
The narrow profile allows you to dig footings, trench utility lines, or pull boulders without destroying the surrounding landscape or ruining the grade.
Built for the Long Haul
Proudly welded and powder-coated in the USA, this attachment is overbuilt to survive brutal job site conditions and years of relentless commercial abuse.
| Loflin Skid Steer Stump Bucket Specs | |
|---|---|
| Front Cutting Edge | 1/2" Thick High-Carbon Steel |
| Side Plate Thickness | 3/8" Reinforced Steel |
| Bucket Depth (Reach) | 45" (Deep Reach) |
| Width (Front) | 14" |
| Width (Rear) | 20" |
| Digging Teeth | Three (3) Replaceable Series-23 Cast Iron |
| Root Saw Detail | Serrated Side Plates (Both Sides) |
| Mount Type | Universal Skid Steer Quick-Attach (SSQA) |
| Unit Weight | Approx. 425 lbs |
| Machine Type | Full-Size Skid Steer & Track Loaders |
| Finish | Industrial Grade Powder Coat |
| Manufacturing Origin | Made in the USA |
Need expert advice? Call the experts who actually use the tools—Give us a call! (844)-498-2313
Unlock Exclusive Benefits Today:
Are you tired of staring down a massive, deep-rooted stump knowing your standard dirt bucket is just going to bounce off the surface? Most operators reach a point of total frustration when they realize that a 72-inch bucket is essentially a sail in the wind when it comes to digging; it spreads your machine’s power so thin that you can't even penetrate the hardpan, let alone snap a taproot. When you’re fighting the earth with the wrong geometry, you aren't just wasting fuel—you're putting thousands of dollars of stress on your cylinders and pins while the stump stays exactly where it started.
The Loflin Fabrication stump bucket is engineered to turn that wasted energy into raw, ground-breaking leverage by funneling your loader's entire breakout force into a narrow, reinforced prying edge. This isn't a scaled-up toy; it is a specialized industrial tool designed for the high-flow, high-torque environment of a modern skid steer. By focusing the pressure, you can slice through the earth like a hot knife through butter, reaching deep under the root ball to provide the mechanical advantage necessary to pop obstacles that would stall any other attachment in your fleet.
When you’re operating a 75+ HP track loader or a heavy-frame skid steer, you need steel that can actually handle the "grunt" of your machine. While economy buckets use thin, mild steel that "smiles" or twists the moment you apply lateral pressure, the Loflin Fabrication stump bucket is a 425-lb powerhouse built with a 1/2" thick front cutting edge and 3/8" reinforced side plates. This is American-made high-carbon steel designed to stay true through years of heavy prying, demolition, and rock removal, ensuring your investment doesn't end up as a piece of scrap metal after one tough job.
One of the biggest bottlenecks in land clearing is the constant "stop-and-start" of jumping out of the cab to hack away at lateral roots with a chainsaw. This bucket eliminates that downtime with aggressive, deep-serrated side teeth that act as an integrated root saw. As you dig and tilt, these teeth saw through the underground anchors of the stump, allowing you to stay in the climate-controlled comfort of your cab while the bucket does the work of three men. Combined with the three replaceable series-23 cast-iron teeth, you have an attachment that bites into the ground and refuses to let go.
The utility of this bucket extends far beyond just stump removal; it is the ultimate "problem solver" for site preparation and demolition contractors. The elongated floor and narrow profile make it the ideal choice for digging deep footings, trenching for heavy utility lines, or prying up old asphalt and concrete slabs with minimal surface disturbance. It allows you to be incredibly precise, removing a single buried boulder or post without destroying the surrounding grade, saving you hours of remedial dirt work at the end of the day.
At the end of the shift, your productivity depends on gear that doesn't need to be babied, and the Loflin Fabrication stump bucket is built for as many hours as you can handle. Every seam is expertly welded and finished with an industrial powder coat right here in the USA to ensure it stands up to the elements and the abuse of the job site. When you click this into your universal quick-attach plate, you’re equipping your machine with a professional-grade extraction tool that is purpose-built to reclaim the land and outlast the competition.
Massive Breakout Leverage
The elongated, narrow floor acts as a powerful lever, concentrating your loader's hydraulic force to pop deep-seated stumps that standard buckets can't budge.
Industrial-Strength Steel
Built with a 1/2" thick front cutting edge and 3/8" side walls, this 425-lb beast is designed to handle the high-torque prying of 75+ HP machines without warping.
Integrated Root Saws
Aggressive serrated teeth on the side plates saw through lateral roots while you dig, keeping you in the cab instead of reaching for a chainsaw.
Replaceable Backhoe Teeth
Equipped with three Series-23 cast-iron teeth that provide surgical ground penetration and can be easily swapped out after years of heavy use.
Deep-Reach Geometry
The extended bucket depth allows you to get further under the root ball, providing the superior mechanical advantage needed for large-diameter extractions.
Surgical Precision
The narrow profile allows you to dig footings, trench utility lines, or pull boulders without destroying the surrounding landscape or ruining the grade.
Built for the Long Haul
Proudly welded and powder-coated in the USA, this attachment is overbuilt to survive brutal job site conditions and years of relentless commercial abuse.
| Loflin Skid Steer Stump Bucket Specs | |
|---|---|
| Front Cutting Edge | 1/2" Thick High-Carbon Steel |
| Side Plate Thickness | 3/8" Reinforced Steel |
| Bucket Depth (Reach) | 45" (Deep Reach) |
| Width (Front) | 14" |
| Width (Rear) | 20" |
| Digging Teeth | Three (3) Replaceable Series-23 Cast Iron |
| Root Saw Detail | Serrated Side Plates (Both Sides) |
| Mount Type | Universal Skid Steer Quick-Attach (SSQA) |
| Unit Weight | Approx. 425 lbs |
| Machine Type | Full-Size Skid Steer & Track Loaders |
| Finish | Industrial Grade Powder Coat |
| Manufacturing Origin | Made in the USA |
Need expert advice? Call the experts who actually use the tools—Give us a call! (844)-498-2313
