Attempting to dig out large, buried rocks with a standard bucket often results in huge, messy craters and unnecessary strain on your machine’s loader arms. The Greywolf Skid Steer Rock Devil solves this problem by using a targeted, high-leverage design that dives beneath the stone to pull it upward. It is the factual solution for operators who need to clear land quickly while keeping ground disturbance to an absolute minimum.
This attachment is built to leverage the full breakout force of your skid steer, focusing all that power into a single, reinforced extraction point. By hooking beneath the rock’s center of gravity, the Greywolf Skid Steer Rock Devil pops stones out of the earth that would otherwise require hours of manual labor or a full-sized excavator. This makes it an essential tool for farmers and contractors who need to prep stony soil for planting or construction.
The engineering behind the "Devil" hook is rooted in pure strength, featuring 1-inch thick solid steel teeth and hooks that refuse to bend under pressure. While standard tines might snap when prying against a stubborn boulder, this industrial-grade steel is factually proven to withstand the torque of the heaviest track loaders. It provides a level of durability that ensures you can tackle the rockiest terrain with total confidence in your equipment.
To prevent frame twisting during extreme prying, the unit is reinforced with 1/2-inch steel gussets and heavy-duty plates at every stress point. This structural reinforcement ensures that the energy from your machine is transferred directly to the rock rather than being lost to flex in the attachment. The Greywolf Skid Steer Rock Devil is a masterclass in "over-built" machinery, designed for those who don't have time for equipment failure in the field.
The low-profile design of the teeth allows for surgical precision, letting you snag a single rock without dragging a massive pile of topsoil with it. This factual advantage means you spend less time backfilling holes and more time moving on to the next task. For the Timber Splitter Warehouse customer, this efficiency translates directly into lower fuel costs and less wear and tear on your primary machine.
Finished in a high-durability gray and red powder coat, this tool is built to survive the abrasive environment of underground digging. The coating provides a barrier against the moisture and friction that cause raw steel to rust and pit over time. Invest in this American-made extractor to experience the factual difference in power and precision when clearing your most challenging, rock-filled acreage.
Massive 1-Inch Solid Steel Construction
Both the primary digging teeth and the extraction hook are factually manufactured from 1" thick high-strength steel. This provides the industrial-grade rigidity required to pry against the maximum breakout force of a heavy skid steer without bending or snapping.
Surgical Low-Disturbance Extraction
This tool is engineered to dive deep and snag specific rocks while leaving the surrounding topsoil largely untouched. This offers a factual advantage over using a bucket, as it prevents the creation of massive, messy craters that require hours of backfilling and site repair.
Reinforced 1/2-Inch Steel Gussets
To handle extreme prying leverage, the frame is fortified with 1/2" steel gussets and integrated reinforcing plates. This structural design factually prevents frame twisting and ensures that the machine's power is concentrated directly on the rock being extracted.
High-Leverage "Devil" Hook Design
The unique geometry of the 1" thick hook allows you to get beneath a boulder’s center of gravity. This provides the factual mechanical advantage needed to "pop" stones out of the earth that standard pallet forks or buckets simply cannot snag.
Universal Quick-Attach Compatibility
Featuring a standard mounting plate, this attachment is factually compatible with all modern skid steers and track loaders. This "plug-and-play" versatility ensures it can be shared across your entire fleet of machines without the need for custom adapters.
Abrasion-Resistant Powder Coat
The signature Gray and Red powder coat finish provides a factual protective barrier against the high-friction environment of rock digging. This hardened coating is more durable than standard paint, resisting the rust and corrosion that typically follow heavy abrasive use.
Made-in-the-USA Engineering
Manufactured by K&M in the USA, this attachment follows strict quality control standards for weld penetration and material grade. This provides a proven level of reliability for professional contractors and landowners who cannot afford downtime due to equipment failure.
Additional Options: Check out other Skid Steer Attachments or other Greywolf options
Need expert advice? Call the experts who actually use the tools—Give us a call! (844)-498-2313
Unlock Exclusive Benefits Today:
Attempting to dig out large, buried rocks with a standard bucket often results in huge, messy craters and unnecessary strain on your machine’s loader arms. The Greywolf Skid Steer Rock Devil solves this problem by using a targeted, high-leverage design that dives beneath the stone to pull it upward. It is the factual solution for operators who need to clear land quickly while keeping ground disturbance to an absolute minimum.
This attachment is built to leverage the full breakout force of your skid steer, focusing all that power into a single, reinforced extraction point. By hooking beneath the rock’s center of gravity, the Greywolf Skid Steer Rock Devil pops stones out of the earth that would otherwise require hours of manual labor or a full-sized excavator. This makes it an essential tool for farmers and contractors who need to prep stony soil for planting or construction.
The engineering behind the "Devil" hook is rooted in pure strength, featuring 1-inch thick solid steel teeth and hooks that refuse to bend under pressure. While standard tines might snap when prying against a stubborn boulder, this industrial-grade steel is factually proven to withstand the torque of the heaviest track loaders. It provides a level of durability that ensures you can tackle the rockiest terrain with total confidence in your equipment.
To prevent frame twisting during extreme prying, the unit is reinforced with 1/2-inch steel gussets and heavy-duty plates at every stress point. This structural reinforcement ensures that the energy from your machine is transferred directly to the rock rather than being lost to flex in the attachment. The Greywolf Skid Steer Rock Devil is a masterclass in "over-built" machinery, designed for those who don't have time for equipment failure in the field.
The low-profile design of the teeth allows for surgical precision, letting you snag a single rock without dragging a massive pile of topsoil with it. This factual advantage means you spend less time backfilling holes and more time moving on to the next task. For the Timber Splitter Warehouse customer, this efficiency translates directly into lower fuel costs and less wear and tear on your primary machine.
Finished in a high-durability gray and red powder coat, this tool is built to survive the abrasive environment of underground digging. The coating provides a barrier against the moisture and friction that cause raw steel to rust and pit over time. Invest in this American-made extractor to experience the factual difference in power and precision when clearing your most challenging, rock-filled acreage.
Massive 1-Inch Solid Steel Construction
Both the primary digging teeth and the extraction hook are factually manufactured from 1" thick high-strength steel. This provides the industrial-grade rigidity required to pry against the maximum breakout force of a heavy skid steer without bending or snapping.
Surgical Low-Disturbance Extraction
This tool is engineered to dive deep and snag specific rocks while leaving the surrounding topsoil largely untouched. This offers a factual advantage over using a bucket, as it prevents the creation of massive, messy craters that require hours of backfilling and site repair.
Reinforced 1/2-Inch Steel Gussets
To handle extreme prying leverage, the frame is fortified with 1/2" steel gussets and integrated reinforcing plates. This structural design factually prevents frame twisting and ensures that the machine's power is concentrated directly on the rock being extracted.
High-Leverage "Devil" Hook Design
The unique geometry of the 1" thick hook allows you to get beneath a boulder’s center of gravity. This provides the factual mechanical advantage needed to "pop" stones out of the earth that standard pallet forks or buckets simply cannot snag.
Universal Quick-Attach Compatibility
Featuring a standard mounting plate, this attachment is factually compatible with all modern skid steers and track loaders. This "plug-and-play" versatility ensures it can be shared across your entire fleet of machines without the need for custom adapters.
Abrasion-Resistant Powder Coat
The signature Gray and Red powder coat finish provides a factual protective barrier against the high-friction environment of rock digging. This hardened coating is more durable than standard paint, resisting the rust and corrosion that typically follow heavy abrasive use.
Made-in-the-USA Engineering
Manufactured by K&M in the USA, this attachment follows strict quality control standards for weld penetration and material grade. This provides a proven level of reliability for professional contractors and landowners who cannot afford downtime due to equipment failure.
Additional Options: Check out other Skid Steer Attachments or other Greywolf options
Need expert advice? Call the experts who actually use the tools—Give us a call! (844)-498-2313
